Yamaha PLG150-DR, Owner'S Manual

Page: 63 / 76

MIDI Data Format
63
2.2 Bulk dump
This device uses only the following bulk dump messages.
[ XG BULK DUMP ]
1) XG System bulk dump
2) Multi Part bulk dump
[ PLG150-DR/PLG150-PC NATIVE BULK DUMP ]
1. PLG150-DR/PLG150-PC NATIVE CURRENT VOICE bulk dump
2. PLG150-DR/PLG150-PC NATIVE USER VOICE bulk dump
3. PLG150-DR/PLG150-PC NATIVE MULTI PART bulk dump
2.2.1 XG bulk dump
This message sets XG-related parameters. Unlike parameter change mes-
sages, a single message can modify multiple parameters.
This message format is as follows.
11110000
F0H Exclusive status
01000011
43H YAMAHA ID
0000nnnn
0NH N:Device Number
01001100
4CH Model ID
0sssssss
SSH ByteCountMSB
0ttttttt
TTH ByteCountLSB
0ggggggg
GGH Address High
0mmmmmmm
MMH Address Mid
0lllllll
LLH Address Low
0vvvvvvv
VVH Data
: :
0kkkkkkk
KKH Check-sum
11110111
F7H End of Exclusive
Address and Byte Count are given in tables <1-n>.
Byte Count is indicated by the total size of the Data in tables <1-n>.
Bulk dump is received when the beginning of the block is specified in
“Address.”
“Block” indicates the unit of the data string that is indicated in tables <1-n>
as “Total Size.”
Check sum is the value that produces a lower 7 bits of 0 when this Start
Address, Byte Count, Data, and the Check sum itself are added.
2.2.1.1 XG System bulk dump
This message sets the XG SYSTEM block (see Tables <1-1> and <1-2>).
2.2.1.2 Multi Part bulk dump
This message sets the MULTI PART block (see Tables <1-1> and <1-3>).
2.2.2 PLG150-DR/PLG150-PC Native Bulk Dump
This message sets the special parameters for PLG150-DR/PLG150-PC.
Unlike Parameter change, one message can modify multiple parameters.
11110000
F0H Exclusive status
01000011 43H YAMAHA ID
0000nnnn
0NH N:Device Number
01100111 67H Model ID
0sssssss
SSH ByteCountMSB
0ttttttt TTH ByteCountLSB
0ggggggg
GGH Address High
0mmmmmmm MMH Address Mid
0lllllll
LLH Address Low
0vvvvvvv VVH Data
: :
0kkkkkkk KKH Check-sum
11110111
F7H End of Exclusive
The detail are the same as for 2.2.1 XG Bulk Dump. However, see Tables
<2-n> for the Address, Byte, Count, and block.
2.2.2.1 PLG150-DR/PLG150-PC NATIVE CURRENT VOICE bulk dump
This message sets the PLG150-DR/PLG150-PC NATIVE CURRENT
VOICE block (see Tables <2-1> and <2-2>).
2.2.2.2 PLG150-DR/PLG150-PC NATIVE USER VOICE bulk dump
This message sets the PLG150-DR/PLG150-PC NATIVE USER VOICE
block (see Tables <2-1> and <2-3>).
2.2.2.3 PLG150-DR/PLG150-PC NATIVE MULTI PART bulk dump
This message sets the PLG150-DR/PLG150-PC NATIVE MULTI PART
block (see Tables <2-1> and <2-4>).
3. Realtime Messages
3.1 Active Sensing
a) Send
This is not transmitted.
b) Receive
After FE is received one time, if the MIDI signal does not come within 300
msec, PLG150-DR/PLG150-PC will act the same as when ALL SOUND
OFF, ALL NOTE OFF, and RESET ALL CONTROLLERS are received,
and return to the condition where has not been received once.
<1 - 1>
Parameter Base Address
MODEL ID = 4C
Parameter
Description Address
(H) (M) (L)
XG SYSTEM
00 00 00 System
00 00 7E XG System On
00 00 7F All Parameter Reset
MULTI PART
08 00 00 Multi Part 1
: : : :
08 0F 00 Multi Part 16
PART ASSIGN
70 05 00 PLG150-DR Part Assign
70 06 00 PLG150-PC Part Assign
plg150drpc̲e̲3.fm のコピー Page 63 Friday, May 24, 2002 5:16 PM