23
About the Included CD-ROM
■
MIDI port setting (MIDI Setup)
Before setting the MIDI port on the Plug-in Board Editor, you should set the MIDI port as follows.
This is the port that you’ll use in the Plug-in Board Editor.
●
Using the Plug-in Board Editor as a stand-alone application
1
Start the Plug-in Board Editor.
2
Click the MIDI Setup button in the Toolbar called up via step #1.
3
In the MIDI Setup window called up via step#2, select the MIDI In/Out/Thru port of the
“mother” device.
• MIDI driver software is needed to set the port here. The appropriate MIDI driver is contained in the
CD-ROM included with the “mother” device.
• When the “mother” device and your PC are connected with a USB cable, select “YAMAHA USB
OUT xxx.” When they are connected with serial cable, select “YAMAHA CBX Driver.” For details,
refer to the owner’s manual of the “mother” device.
●
Using the Plug-in Board Editor in the client application as a plug-in software
Select the relevant MIDI port from the MIDI Setup dialog in the client application. Refer to the client
application owner’s manual.
MIDI Setup button
NOTE
plg150drpc̲e̲2.fm のコピー Page 23 Friday, May 24, 2002 5:15 PM
Summary of Contents for PLG150-DR
Page 1: ......
