background image

RX-E810/RX-E410/NX-E800

8

 INTERNAL VIEW

MAIN (3) P.C.B. (U, C, T, A, B, G, L, V models)
Power Transformer
MAIN (2) P.C.B.
AM / FM Tuner
OPERATION (2) P.C.B.
INPUT (1) P.C.B.
OPERATION (1) P.C.B.
INPUT (2) P.C.B.
MAIN (1) P.C.B.
MAIN (4) P.C.B.

9

8

7

2

4 5

1

6

3

1
2
3
4
5
6
7
8
9
0

0

DISASSEMBLY PROCEDURES

Fig. 1

Fig. 2

(Remove parts in disassembly order as numbered.)

1. Removal of Top Cover

a. Remove 4 screws (

1

) and 4 screws (

2

). (Fig. 1)

b. Lift the top cover at the rear and move it rearward slantingly.

(Fig. 1)

Top cover

Hook

Hook

Front panel unit

4

3

5

0

3

1

1

2

CB21

CB18

CB201

CB200

CB209

Front panel unit

MAIN (4) P.C.B.

MAIN (1) P.C.B.

INPUT (1) P.C.B.

INPUT (2) P.C.B.

2. Removal of Front Panel

a. Remove CB18, CB21, CB200, CB201 and CB209. (Fig. 2)
b. Remove 2 screws (

3

), 2 screws (

4

) and 1 screw (

5

).

(Fig. 1)

c. Release 2 hooks and remove the front panel unit by pull-

ing it forward. (Fig. 1)

• When checking the P.C.B.:

a. Remove the top cover and the front panel unit.
b. Remove 2 screws (

6

). (Fig. 3)

c. Remove the OPERATION (2) P.C.B. which is con-

nected directly to the lower P.C.B. with connections.

d. Remove 6 screws (

7

). (Fig. 4)

e. Remove 5 screws (

8

). (Fig. 4)

f. Remove 2 screws (

9

). (Fig. 3)

g. Remove 1 screw (

0

). (Fig. 1)

h. Reinstall the OPERATION (2) P.C.B..
i. Reinstall 2 screws (

6

). (Fig. 3)

j. Remove the power transformer and MAIN P.C.B. (with

the rear panel attached) from the main chassis. (Fig. 5)

Fig. 3

Fig. 4

Fig. 5

OPERATION (2) P.C.B.

6

9

Fig. 6

Main chassis

8

7

7

MAIN (1) P.C.B.

Heat sink

Ground lead

Ground lead

Rear panel

G2

G4

Power transformer

CB21

CB18

CB201

CB200

CB209

Front panel unit

k. With the rear panel attached, set the MAIN P.C.B. on its

side.
At this time, set the power transformer on its side as
well. (Fig. 5)

l. Using a ground lead or the like, connect G2 and G4 of

the MAIN P.C.B. with the rear panel. (Fig. 5)

m. With the front panel unit set on its side, reconnect 5 con-

nectors (CB18, CB21, CB200, CB201, CB209). ( Fig. 6)

n. Connect the power cable, turn on the power and check

for operation.

Summary of Contents for PianoCraft MCR-E810


























































Reviews: