Yamaha PF-500, Owner'S Manual

Page: 70 / 108

70
PF-500
Detailed settings for the voices [VOICE SETTING]
In Dual mode, parameters with the “*” mark are set for
Voice 1 and Voice 2 individually.
Parameter names enclosed in parentheses ( ) are dis-
played in Dual mode.
The pitch of a note can be shifted upward or down-
ward in steps of an octave.
See the procedure on page 63.
In Dual mode:
Setting range:
–2 (two octaves lower) - 0 (no pitch shift) - +2
(two octaves higher)
You can set the volume level for each voice part.
See the procedure on page 63.
In Dual mode:
Setting range:
0 - 127
You can specify the position in the stereo image
from which you hear the sound.
See the procedure on page 63.
In Dual mode:
Setting range:
L64 (hard left) - C (center) - R63 (hard right)
The pitch of the two sounds selected in Dual mode
can be “skewed” slightly away from each other.
See the procedure on page 63.
Setting range:
–20–+20 (Positive (+) settings will raise the pitch
of the first sound and lower the pitch of the second
sound. Negative (–) settings will do the opposite.)
Setting the octave [Octave]*
Setting the volume level
[Volume]*
TIP
TIP
C
A
D
B
NO YES
C
A
D
B
Voice for editing (Voice 1 or Voice 2)
NO YES
C
A
D
B
NO YES
C
A
D
B
Voice for editing (Voice 1 and Voice 2)
NO YES
Setting the position of right
and left channels [Pan]*
Make fine adjustments to the
pitch (only in Dual mode)
[Detune]
C
A
D
B
NO YES
C
A
D
B
Voice for editing (Voice 1 or Voice 2)
NO YES
C
A
D
B
NO YES