Yamaha PF-500, Owner'S Manual

Page: 88 / 108

88
PF-500
Message List
Message Meaning
This message prompts you to select whether you wish to overwrite
the existing data with new data when you add recordings to a
song. Press the B [+ (YES)] button to allow overwriting. Press the
B [– (NO)] button to cancel.
You tried to start playing a song or perform another operation right
after you select the song. Wait until the message disappears.
You tried to copy or delete data in internally-protected files (such as
commercially available music data). You cannot write to, copy, or
delete such files.
After you load an internally-protected song such as commercially
available music data into the PF-500’s Current memory or storage
memory, you tried to save the song to a personal computer. You can-
not save such a song to a personal computer etc.
This message prompts you to select whether you wish to save the
edited settings. Press the B [+ (YES)] button to save the settings.
Press the [EXIT] button to cancel.
You tried to perform another operation before saving the recorded
song to storage memory. If you continue the operation, the recorded
song will be lost. To delete the new recording, press the B [– (NO)]
button. To keep the recording, press the B [+ (YES)] button. The PF-
500 displays the “SaveToMemory” (page 45) parameter screen. Save
the recorded song, then proceed to another operation.
1. This message will appear if a problem is found with the song data
when you select a song or while the song is playing. In this case, re-
select the song, and try once again to play it back. If the message
still appears, the song data may have been damaged.
2. This message will appear if a different “CharacterCode” (page 47)
is selected than when you assigned the song name. In this case,
switch the “CharacterCode”, re-select the song, and play back.