Yamaha PDM-4220 Page 1 Service Manual Download

Page: 1 / 58

SERVICE MANUAL

1 0 0 9 8 5

SERVICE MANUAL

■

Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

■

Connection diagram . . . . . . . . . . . . . . . . . . . . . . . 36

■

Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

■

Disassembly diagram . . . . . . . . . . . . . . . . . . . . . . 39

■

Replacement parts list . . . . . . . . . . . . . . . . . . . . . 41

■

Diagnosis of the panel module . . . . . . . . . . . . . 42

■

CONTENTS

■

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

■

Service points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

■

Component names . . . . . . . . . . . . . . . . . . . . . . . . . 5

■

Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

■

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 22

■

Self diagnosis function . . . . . . . . . . . . . . . . . . . . 32

PLASMA MONITOR

PDM-4220

Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury, harmful radiation

and materials, various measures are provided in this Plasma display.

Be sure to read cautionary items described in the manual to maintain safety before servicing.

Caution

1. Since Panel Module and front Filter are made of glass, handling the broken Module and Filter shall be

taken care sufficiently in order not to be injured.

2. Replacing work shall be started after the Panel Module and the AC/DC Power supply become sufficiently

cool.

3. Special care shall be taken to the display area in order not to damage its surface.

4. The Panel Module shall not be touched with bare hand to protect its surface from stains.

5. It is recommended to use clean soft gloves during the replacing work in order to protect not only the dis-

play area of the Panel Module but also a serviceman himself.

6. The Chip Tube of Panel Module (located upper left of the back and surrounded by frame) and flexible

cables connecting Panel glasses to drive circuit PWBs are very weak, so shall be taken care sufficiently

not to break. If you break Chip Tube, the Panel doesn’t display anything forever.

Service Warning

© 2005 YAMAHA CORPORATION. All rights reseved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.

’05.10

Summary of Contents for PDM-4220



























































Search results

Summary of Contents for PDM-4220

Reviews:

Related manuals for PDM-4220

Brands by name

Popular brands

Yamaha PDM-4220, Service Manual

Search results

Summary of Contents for PDM-4220

Reviews:

Related manuals for PDM-4220

Brands by name

Popular brands