Yamaha PB65ML, Assembly Manual

Page: 14 / 20

INSTALLING THE INCLUDED PARTS
– 12 –
7
9
10. Installing the rear reflector
Install the rear reflector
1
, band
2
, screw
3
,
and nut
4
as shown, and then tighten them
together to the specified torque.
Secure them to the frame with the band
2
.
TIP
8
Adjust the rear reflector
1
so that it is facing
straight backward, then tighten it.
8
When assembling the rear reflector
1
to the
frame, adjust the length by cutting the adjust-
ment pad inside the band to fit the frame.
11. Installing the pedals
Install the pedals
1
to the crank
a
, then tighten
to the specified torque.
TIP
8
Right-hand screw (marked R) for right pedal
8
Left-hand screw (marked L) for left pedal
12. Installing the battery end cap
Make sure that charging of the battery pack
1
is complete.
As shown, arrange the battery pack
1
so that
the label
a
can be read, position the L-shaped
portion of the plate
2
downward, and then
install the plate to the battery. Install the battery
end cap
3
and collars
4
, and then tighten the
bolts
5
and screw
6
to the specified torque.
1
2
3
4
Tightening tor qu e 1.5 N·m (0.15 kgf·m, 1.1 l b ·ft)
1
1
Rear reflector 1 A
2
Band 1 A
3
Screw 1 A
4
Nut 1 A
1
a
L R
Tightening tor qu e 40 N·m (4.0 kgf·m, 3 0 l b ·ft)
1
Pedals (left and right)
1
each
A
Tightening tor qu e 2.0 N·m (0.20 kgf·m, 1.5 l b ·ft)
1
a
2
3
6
5
4
1
1
Battery pack 1 B
2
Plate 1 A
3
Battery end cap 1 A
4
Collar 3 A
5
Bolt 3 A
6
Screw 1 A
X1V-28107-10.book 12 ページ ２０２０年８月３日 月曜日 午後４時１１分