background image

Editing a Voice in Detail [VOICE EDIT]

70   

P-250

Edit Operation

Setting the MSB of the Send Bank Select 
message* [SendBankMSB(SendMSB)]

Setting the LSB of the Send Bank Select mes-
sage* [SendBankLSB(SendLSB)]

Setting the Program Change message* 
[SendPG#]

Press the D[–]/[+] buttons to select “PRESET” (preset 
value) or a fixed value ranging from 0 through 127 (For 
the “SendPG#” parameter, from 1 through 128).
If you select “PRESET,” the same value as that is sent to 
the internal tone generator will be output. If you change 
one of these three parameter settings from a fixed value 
to “PRESET,” the rest of the parameters will be also 
changed to “PRESET.” On the other hand, if you change 
one of the settings from “PRESET” to a fixed value, the 
rest of the parameters will be set to the same fixed value.

Turning the Internal tone generator on/off* 
[InternalTG]

Press the D[–]/[+] buttons to turn the Internal Voice on/
off.

• Refer to page 61 for general information on setting the parameters.
• Refer to pages 3—5 of the separate “Data List” for information on the default parame-

ter settings.

• All parameters accessed via the [VOICE EDIT] button are performance parameters (page 30).

Summary of Contents for P-250







































































































Reviews: