background image

 

P-250

 

61

 

Editing

 

Edit Operation

 

 

Basic Editing Flow

 

1

 

Access a setting menu.

 

Press the desired setting button ([SONG SET-
TING], [VOICE EDIT], [MASTER EQ EDIT], [MIDI 
SETTING], or [OTHER SETTING]) to access the 
corresponding setting menu.

 

Press the [EXIT] button at any time to close the setting 
menu.

 

2

 

Select the desired parameter or part.

 

Press the setting button, A [–]/[+], and/or C [–]/[+] 
buttons repeatedly as required.

 

3

 

Set the parameter or part.

 

Some parameters or parts lead you to more 
options. Use the B [–(NO)]/[+(YES)], C [–]/[+], 
and D [–]/[+] buttons to select or set the option.

 

To restore the default parameter value, press the [

 

 

and [+] buttons simultaneously.

 

4

 

Write, execute, or save the data.

 

There are three ways to respond to the messages dis-
played at this juncture.

 

If “Execute?-->” or “Start?-->” appears:

 

Press the B [+(YES)] button to display confirmation 
message “Sure?-->.”
To proceed, press the B [+(YES)] button again. The P-
250 displays “Executing” and writes the data. When 
the operation is complete, it displays “Completed” for 
three seconds, then returns to the previous screen. To 
cancel the operation, press the B [–(NO)] button 
instead of the B [+(YES)] button.
If the P-250 does not display the previous screen three 
seconds after it displays “Completed,” press the B [+ 
(YES)] or [EXIT] button. The P-250 then displays the 
previous screen.

 

If “Set?-->” appears:

 

Press the B [+(YES)] button to execute the setting. The
P-250 displays “Executing” and saves the data.When 
the operation is complete, the P-250 displays “Com-
pleted” for three seconds, then displays the previous 
screen.

 

5

 

Close the parameter setting menu.

 

Press the [EXIT] button.

 

If you wish to save the parameter setting for 
a particular performance file:

 

Press the [PERFORM.FILE] button, press the A [–]/[+] 
buttons to select “Performance” on the screen, press 
the C [–]/[+] or VARIATION [

 

 

]/[

 

π

 

] buttons to select 

the destination performance, then press the B [+(YES)] 
button.

  

VOICE/PERFORMANCE

TEMPO

SONG

SONG BALANCE

MASTER VOLUME

MIDI SETTING

CHORUS

REVERB

SPLIT

CONTRAST

XG

8

16

B

YES

NO

D

A

C

BASS

15

7

PERFORM. FILE

MASTER EQ EDIT

VARIATION

PERFORMANCE

VOICE EDIT

VIBES

GUITAR

14

6

SYNTH. PAD

13

5

E.PIANO3

HARPSI.

CLAVI.

ORGAN 1

EXIT

9

B

A

1

G.PIANO 1

EX.TRACKS

SONG FILE

PANEL LOCK

TRACK1

TOP

SONG SELECT

KEYBOARD

SONG

MIN

MAX

REC

START/STOP

SYNCHRO START

NEW SONG

TRACK2

MIDI OUT

ORGAN 2

10

2

G.PIANO 2

STRINGS

11

3

E.PIANO1

CHOIR

12

4

E.PIANO2

OTHER SETTING

DOWN

SONG SETTING

UP

2

2, 3

1

1

3, 4

1

3

1

5

1

Summary of Contents for P-250







































































































Reviews: