98
Appendix
Sound volume will not increase.
The power of the device connected to
CinemaStation’s output jack is not turned
on.
If the power of the device connected to the
output jack is not turned on, playback may
be distorted and volume low. Turn on the
power of the connected device.
Sound field effect will not work.
It is not possible to record audio enhanced
by a sound field effect.
Audio recording will not work.
1
You are trying to make a digital recording
with an analog source.
Try inputting a digital source.
2
CinemaStation and the recording device are
not connected digitally.
Connect them digitally.
3
You are trying to make an analog recording
with a digital source.
Try inputting an analog source.
4
CinemaStation, the playback device and the
recording device do not share an analog
connection.
Connect them with an analog connection.
5
Some recording devices are not able to
record a digital source such as Dolby Digital
or DTS.
CinemaStation is not working normally.
The internal microcomputer froze up due to
electric shock (lightening bolt or excessive
static electricity) or drop in power supply.
Pull out the AC plug from the outlet and
after about 30 seconds plug it in again.
Digital and high frequency devices create
noise.
CinemaStation is placed too close to a
digital or high frequency device.
Place CinemaStation further away from
such devices.
SET MENU setting content has disappeared.
The power cord has not been connected to
the outlet for over a week or the external
timer was disconnected.
Set the SET MENU again.
Cause
Solution
Cause
Cause
Solution
Cause
Solution
Cause
Solution
Cause
Solution
Cause
Cause
Solution
Cause
Solution
Cause
Solution
019DVX-S120-en
03.8.5, 1:52 PM
98
