7
English
■
Mounting the effect speakers
Mount the effect speakers on a shelf, rack or floor, or hang
them on the wall.
To mount the effect speakers on a wall
Mount the speakers in either of the two configurations shown in
the following figures by using the holes provided on the
speakers’ rear panels.
Fasten wood screws onto a firm wall or wall support as shown
in the following figure, and set the mounting holes on the
protruding screws.
* Make sure that the screw is caught securely at a narrow part
of the hole.
For the upright mounting, only one hole is provided.
As for the side-long mounting, two holes are provided. Be sure
to use these two holes as a set.
WARNING:
• Each speaker weighs 1.4 kg (3 lbs. 1 oz.). Do not mount
them on thin plywood or soft wall surface material. If
mounted, the screws may come out of the flimsy surface
and the speakers may fall down. That damages the
speakers or causes personal injury.
• Do not install the speakers to wall with nails, adhesives,
or other unsound hardware. Long-term use and
vibrations may cause them to fall down.
• To avoid accidents resulting from tripping over loose
speaker cords, fix them to the wall.
Upright mounting
Side-long mounting
60mm
(2-3/8”)
Diam. 4–5 mm
(3/16”)
Min.
12 mm
(1/2”)
Wood screw
(Available at a
hardware store)
Wall or
wall support
4–5 mm (3/16”)
For upright
mounting
For side-long
mounting
For side-long
mounting