background image

NS-IW280C

P/N 430065

Printed in China

YAMAHA Electronics Corporation, USA, is proud of the experienced craftsmanship that goes into each and every YAMAHA Loudspeaker.  YAMAHA sells 

its products only through a network of high quality, specially authorized dealers and is pleased to offer the following Limited Warranty, which applies only 

to products purchased by consumers directly from our authorized dealers.  We suggest that you read the Limited Warranty thoroughly, and invite you to 

contact your authorized YAMAHA dealer or the YAMAHA Electronics Corporation, USA, Service Department if you have any questions.

SPEAKER SYSTEMS LIMITED WARRANTY

 

Duration of Warranty:

Yamaha Loudspeakers are covered by this warranty for a period of 2 years from date of purchase.

What is Covered and what is Not Covered:

This warranty covers all defects in materials or workmanship,  but DOES NOT COVER the following:

(1)  Damage, deterioration or malfunction resulting from:

a.  Accident, negligence, misuse, abuse, improper installation or operation or failure to follow instructions contained in your Owner’s Manual.

b.  Any shipment of the product.  (Claims must be presented to the carrier.)

c.  Repair or attempted repair by anyone other than YAMAHA or a specially authorized YAMAHA Service Center.

(2)  Any unit which has been altered, or on which the serial number or cabinet has been defaced, modified or removed.

(3)  Consequential, economic or property damage.

(4)  Normal wear and maintenance.

(5)  Initial setup or check-ups with no defects found.

(6)  Labor & materials required to remove and reinstall the loudspeaker.

(7)  Any unit which has not been purchased by the consumer directly from an authorized YAMAHA dealer in the USA or Puerto Rico.  If you are 

uncertain as to whether a dealer has been authorized by YAMAHA, please contact YAMAHA at the telephone number shown below.

(8)  Any unit used for industrial or commercial purposes.

Who may enforce the warranty:

This warranty is enforceable only by the original purchaser of the unit, who purchased from a Yamaha dealer authorized to make that sale.

What we will pay for and what you must pay for:

YAMAHA will repair or replace products covered by this warranty, without charge to the consumer for labor or materials.  Some repair parts may be 

used or rebuilt replacements, that meet or exceed Yamaha specifications for new parts, in exchange for defective parts.  YOU ARE RESPONSIBLE 

FOR ANY INSTALLATION OR REMOVAL CHARGES AND FOR ANY INITIAL SHIPPING CHARGES, if the product(s) must be shipped for 

warranty service.  However, we will pay the return shipping charges to any destination within the USA if the repairs are covered by the warranty.

How you can get Warranty Service:

(1)  If your YAMAHA loudspeaker(s) appears to require service, contact the authorized YAMAHA dealer and the dealer will advise you of the 

procedures to be followed.  If this is not practical, deliver the defective product(s) to a specially authorized YAMAHA Service Center (obtain 

referrals from the YAMAHA Web site or toll-free YAMAHA phone number shown below).

(2)  Product(s) shipped for service should be packed securely and must be accompanied by a detailed explanation of the problem(s) requiring 

service, as well as your sales receipt or other proof of date and place of purchase, as evidence of warranty coverage.

(3)  Warranty registration is not required for warranty coverage.

Limitation of Implied Warranties:

ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE 

LIMITED IN DURATION TO THE LENGTH OF THIS EXPRESS WARRANTY.  SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG 

AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

Exclusion of Damages:

YAMAHA’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT OUR OPTION.  

IF WE ELECT TO REPLACE THE PRODUCT, THE REPLACEMENT MAY BE A RECONDITIONED UNIT.  YAMAHA SHALL NOT BE LIABLE FOR 

DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF 

USE, OR ANY OTHER DAMAGES WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.  SOME STATES DO NOT ALLOW 

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL 

OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.  THIS WARRANTY GIVES 

YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Should you have any questions about service received or if you need assistance in locating an authorized YAMAHA Service Center, please 

contact:

SERVICE DEPARTMENT

YAMAHA Electronics Corporation, USA

6660 Orangethorpe Avenue, Buena Park, California   90620-1345

internet URL:  

www.yamaha.com/yec

For referral to your nearest authorized YAMAHA Preferred Customer Service Center call 1-800-4YAMAHA.

Do not return any product to the above address without a written Return Authorization issued by YAMAHA.

Summary of Contents for NS-IW280CWH






































Reviews: