12
En
1
Press
A
(power) to turn on this unit.
2
Press one of the Input selector buttons to
select the desired input source.
3
Press SPEAKERS A and/or SPEAKERS B to
select the desired speaker(s).
y
• When one set of speakers is connected using bi-wire
connections, or when using two sets of speakers
simultaneously (A and B), make sure SP A and SP B are
displayed on the front panel display.
• When listening with headphones, turn off the speakers.
4
Play the source.
5
Press /– to adjust the sound
output level.
y
You can adjust the tonal quality by using BASS –/+ and
TREBLE –/+, and the left/right sound balance of speakers
by using BALANCE L/R (see page 6).
6
When finished listening, press
A
(power) to
set this unit to standby mode.
Press
A
(power) to turn this unit on again.
y
• You can also use the buttons or knobs on the front panel if
they have the same or similar names as those on the
remote control.
• For recording, see page 5.
Use this feature to automatically set this unit to standby
mode after a certain amount of time. The sleep timer is
useful when you are going to sleep while this unit is
playing or recording a source.
Press SLEEP repeatedly to set the time duration
until the unit enters standby mode.
Each time you press SLEEP, the time duration indicated
on the front panel display changes cyclically as shown
below.
The SLEEP indicator blinks while setting the amount of
time for the sleep timer.
If the sleep timer is set, the SLEEP indicator on the front
panel display lights up.
y
To cancel the sleep timer, do one of the following:
– Select “SLEEP OFF”.
– Press
A
(power) to set this unit to standby mode.
PLAYBACK
Playing a source
SLEEP
LINE 1
CD
TUNER
TUNING
PRESET
TREBLE
SPEAKERS
R
BASS
MENU
DIMMER
MUTE
VOLUME
BALANCE
BLUETOOTH
ENTER
MEMORY
INFO
BAND
LINE 2
LINE 3
B
A
R
B
A
A
(power)
Input selector
buttons
SPEAKERS A/B
/–
TREBLE –/+
BASS –/+
BALANCE L/R
Using the sleep timer
SLEEP
LINE 1
CD
TUNER
BAND
LINE 2
LINE 3
A
(power)
SLEEP
120 min
90 min
60 min
30 min
off
