Deutsc
h
Français
Español
English
E-
3
We recommend you to use the optional speaker stands (SPS-HF101/SPS-LF101) for setting the speaker. Please
refer to the owner’s manual included with the speaker stands for specific installation instructions.
This speaker may also be hung on a wall, utilizing the key holes on the rear of the speakers.
Wall mounting for the front/surround speaker
Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the rear of the
speaker on the protruding screws.
Make sure that the screws are securely caught by the narrow sections of the “key hole” opening.
SETTING UP THE SPEAKER
WARNING:
• The speaker weights 3.6 kg (7.92 lbs). Do not mount them on thin plywood or a wall with soft surface
material. If mounted, the screws may come out of the flimsy surface and the speakers may fall. This
damages the speakers or causes personal injury.
• Do not fasten the speaker to a wall with nails, adhesives, or any other unstable hardware. Long-term use
and vibrations may cause them to fall.
• To avoid accidents resulting from tripping over loose speaker cables, fix them to the wall.
• Secure installation is the purchaser’s responsibility.
*a
*b
Wall / wall support
Tapping screw
(Available at the
hardware store)
The screw holes are designed
specifically for use with the inch
screws supplied with the SPS-
HF101 and SPS-LF101 speaker
stands (sold separately).
* Do not use this screw
hole.
Use the key hole
Use the key hole
*a: Min 38 mm (1-1/2")
*b: 5.5 mm (7/32")
Screw
diameter
4~4.5 mm
(1/8"~3/16")
