9
English
Red: positive (+)
Black: negative (–)
How to Connect:
➀
Press the tab on the terminal down, as shown in the figure.
➁
Insert the bare wire end properly into the terminal hole.
[Remove approx. 10 mm (3/8”) insulation from the speaker
cord.]
➂
Remove your finger from the tab to allow it to lock snugly
on the cord’s wire end.
➃
Test the security of the connection by tugging lightly on the
cord at the terminal.
Note
Do not let the bare speaker wires touch each other as this
could damage the speaker and/or the amplifier.
Good
No good
1
2
3
How to connect speaker cords to the input terminals of the speakers
(except the subwoofer)
How to connect speaker cords to the subwoofer’s OUTPUT/INPUT1 terminals
For connections, cut the speaker wires as short as possible.
If the connections are faulty, no sound will be heard from the
speakers.
How to Connect:
Red: positive (+)
Black: negative (–)
➀
Unscrew the knob.
➁
Insert the bare wire.
[Remove approx. 10 mm
(3/8”) insulation from the
speaker cord.]
➂
Tighten the knob and
secure the wire.
Note
Do not let the bare speaker wires touch each other as this
could damage the speaker and/or the amplifier.
* Banana Plug connections are also possible (except for
Europe model). Simply insert the Banana Plug connector
into the corresponding terminal.
1
2
3
10 mm
Red
