11
English
•
Connect the main speakers to the speaker output terminals
of the amplifier.
•
Amplifier line output terminals are generally labeled PRE
OUT or SUBWOOFER OUT.
*
For PRE OUT terminal connection, the amplifier must
possess at least two sets of PRE OUT terminals. With
some amplifiers with only one set of PRE OUT terminals,
connection can result in no sound from the main left and
right speakers. In this case, select the method of
connecting to the speaker output terminals.
•
To connect with a YAMAHA DSP amplifier (or AV receiver),
connect the LOW PASS (or SUBWOOFER etc.) terminal on
the rear of the DSP amplifier (or AV receiver) to either the
left (L) or right (R) INPUT2 terminal of the subwoofer.
To connect the subwoofer to the SPLIT SUBWOOFER
terminals on the rear of the DSP amplifier, connect them to
both of the left (L) and right (R) INPUT2 terminals of the
subwoofer.
OUTPUT
TO SPEAKERS
INPUT1
FROM AMPLIFIER
INPUT2
ON
OFF
AUTO
POWER
INPUT2
ON
OFF
AUTO
POWER
PRE OUT
(
SPLIT
,
SUBWOOFER
)
LOW PASS
(
SUBWOOFER
)
Pin plug cords
Amplifier
To AC outlet
To connect the subwoofer to line output (pin jack) terminals of the amplifier
Notes
•
When connected to line output terminals of the amplifier,
other speakers should not be connected to the OUTPUT
terminals on the rear panel of the subwoofer. If connected,
they will not produce sound.
•
When connecting to a monaural line output terminal of the
amplifier, connect to either the left or right INPUT2 terminal.
Subwoofer
Main speaker
Main speaker
Left
Right
