Yamaha NEO'S 4 2008, Owner'S Manual

Page: 62 / 80

1. Turn signal light bulb
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10681]
EAUS1151
Replacing the license plate
light bulb (Depends on
models)
1. Remove the lens by removing the
screw.
1. Screw
2. License plate light bulb socket
2. Remove the burnt out bulb by
pulling it out.
3. Insert a new bulb into the socket.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise
the lens may break.
[ECA11191]
EAU45461
Replacing the auxiliary light
bulb (Depends on models)
If the auxiliary light bulb burns out,
replace it as follows.
1. Place the vehicle on the centers-
tand.
2. Remove cowling A. (See page
6-6).
3. Remove the auxiliary light socket
(together with the bulb) by pulling
it out.
1. Auxiliary light bulb socket
4. Remove the burnt out bulb by
pulling it out.
1
1
2
PERIODIC MAINTENANCE AND ADJUSTMENT
6-29
6
5C3-F819D-E0 6/2/09 13:03 Página 62