– 40 –
(8) Throughout the emissions warranty period defined in Subsection (b)(2), the
manufacturer must maintain a supply of warranted parts sufficient to meet the
expected demand for such parts.
(9) Any replacement part may be used in the performance of any warranty
maintenance or repairs and must be provided without charge to the owner. Such
use will not reduce the warranty obligations of the manufacturer.
(10) Add on or modified parts that are not exempted by the Air Resources Board may
not be used. The use of any non exempted add on or modified parts will be
grounds for disallowing a warranty claim. The manufacturer will not be liable to
warrant failures of warranted parts caused by the use of a non exempted add on or
modified part.
(11) The manufacturer issuing the warranty shall provide any documents that describe
that manufacturer’s warranty procedures or policies within five working days of
request by the Air Resources Board.
WARRANTED PARTS INCLUDE the following:
1. Fuel Metering System
Carburetor and internal parts (or fuel injection system)
Air/fuel ratio feedback and control system
Cold start enrichment system
2. Air Induction system
Controlled hot air intake system
Intake manifold
Air filter
3. Ignition System
Spark plugs*
Magneto or electronic ignition system
Spark advance/retard system
4. Exhaust Gas Recirculation (EGR) System
EGR valve body, and carburetor spacer if applicable
EGR rate feedback and control system
5. Air Injection System
Air pump or pulse valve
Valves affecting distribution of flow
Distribution manifold
6. Catalyst or Thermal Reactor System
Catalytic converter
Thermal reactor
Exhaust manifold
7VB-F-10_E0.indd 40
2012/08/10 14:05:05
