MX49 MX61 MX88 Reference Manual
55
This convenient operation lets you copy Common Edit and Part Edit settings of a specific Performance to the currently
edited Performance. This is useful if you are creating a Performance and wish to use certain parameter settings of
another Performance.
Display (A), which allows you to select the source Performance to be copied, appears first. Select the desired
Performance here, then press [ENTER]. Next shown is display (B), which allows you to select the data type. Select the
data type for both the source and destination, then press [ENTER]. Finally, press [INC/YES] to execute the Copy.
1
Data type of Performance (source)
Determines the Performance number to be copied. When “---(---): (Current)” is selected, the current Performance is
specified as the source Performance. Accordingly, you can copy the parameter settings from a Part to a different Part of
the same Performance.
Settings:
Current, 001 – 128
2
Data type of the source
Determines the source data type including the Part number. Select the source setting field with the Cursor [<] button,
then select the data type with the [DATA] dial.
Settings:
common, part 1 –16
3
Data type of the destination
Determines the destination data type including the Part number. Select the destination setting field with the Cursor [<]
button, then select the data type with the [DATA] dial.
Settings:
common, part 1 – 16
NOTE
If the data type of the source or destination is set to common, the other will be automatically set to common, since Common data
cannot be copied to Part data, and vice versa. Also, if the type is set to Part data, the other will be automatically set to Part 1.
This function lets you send all your edited parameter settings for the currently selected performance including the
edited Voice data of Parts 1 – 16 to a computer or another MIDI device for data archiving.
Select “04:Bulk” and press [ENTER]. When the subsequent confirmation display appears, press [INC/YES] to execute
the Bulk Dump operation.
NOTE
In order to execute Bulk Dump, you will need to set the correct MIDI Device Number, with the following operation: [UTILITY]
Select “02:MIDI” with the Cursor [
u
]/[
d
] buttons
[ENTER]
Select “DeviceNo” with the Cursor [
u
]/[
d
] buttons
Select
“DeviceNo” value with the [DATA] dial.
Copy
Bulk
JOB
*
Copy
*
from
*
001(A01):MXCategory
JOB
*
Copy
*
from
****
part01
/x
*
part01
1
2
3
A
B
[E
N
TER]
