42
MX49/MX61 Owner’s Manual
Appendix
Distorted sound.
Are the effect settings appropriate?
Use of certain effects at certain settings may produce distortion.
Are the filter settings appropriate?
Excessively high filter resonance settings can cause distortion.
Are any of the following volume parameters set so high that clipping is occurring?
Sound is cut off.
Is the entire amount of notes played (via your keyboard playback and Song/Pattern/Arpeggio playback) exceeding the maximum
polyphony of this instrument?
The maximum number of simultaneous notes may be less than 128 depending on the Voices used.
Only one note sounds at a time.
When this situation occurs, the Mono/Poly parameter in the current mode is set to “mono.” If you wish to play chords, set this parameter
to “poly.”
Pitch or intervals are wrong.
Is the Master Tune parameter in the Utility display set to a value other than “0”?
Is the Note Shift parameter in the Utility display set to a value other than “0”?
Are the Note Shift and Detune parameters of each Part set to values other than “0”?
No effect is applied.
Check the on/off status of the Insertion Effect switch.
Is the Reverb Send or Chorus Send set to a value other than “0”?
Has the Insertion Effect type for the Part been set to “thru”?
The Edit Indicator appears, even when parameters are not being edited.
Keep in mind that even though the Edit mode is not active, simply moving a Knob or playing back the MIDI data of the USB flash
memory may cause the Edit Indicator to appear.
[EDIT]
Select “02:Part”
[ENTER]
Select “05:Voice Insert Eff”/“05:DrumKit Insert Eff”
[ENTER]
[EDIT]
Select “02:Part”
[ENTER]
Select “02:Filter/EG”
[ENTER]
[UTILITY]
[EDIT]
Select “01:Common”
[ENTER]
Select “05:General”
[ENTER]
“Volume”
[PART SELECT]
“Volume”
[UTILITY]
Select “01:General”
[ENTER]
“WAV Volume”
[EDIT]
Select “02:Part”
[ENTER]
Select “01:PlayMode”
[ENTER]
“Mono/Poly”
[UTILITY]
Select “01:General”
[ENTER]
“Tune”
[UTILITY]
Select “01:General”
[ENTER]
“NoteShift”
[EDIT]
Select “01:Part”
[ENTER]
Select “01:PlayMode”
[ENTER]
“NoteShift”/“Detune”
[EDIT]
Select “02:Part”
[ENTER]
Select “01:PlayMode”
[ENTER]
“InsSw”
[PART SELECT]
“InsSw”
[EDIT]
Select “02:Part”
[ENTER]
Select “01:PlayMode”
[ENTER]
“ChoSend”/“RevSend”
[EDIT]
Select “02:Part”
[ENTER]
Select “05:Voice Insert Eff”/“05:DrumKit Insert Eff”
[ENTER]
Summary of Contents for MX49
Page 1: ...EN Owner s Manual...
Page 47: ......