Yamaha MWS150-C, Owner'S Manual

Page: 43 / 98

For your safety – pre-operation checks
5-2
5
Rear b rake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
7-23, 7-23
Throttle g rip
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca-
ble and grip housing.
7-19, 7-26
Control ca b les
• Make sure that operation is smooth.
• Lubricate if necessary.
7-25
Wheels an d tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
7-20, 7-21
Brake levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
7-26
Centerstan d , si d estan d
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
7-27
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, li g hts, si g nals
an d switches
• Check operation.
• Correct if necessary.
—
Si d estan d switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
4-19
ITEM CHECKS PAGE
UBE2EYE0.book Page 2 Monday, July 17, 2017 2:03 PM