Yamaha MW125 2016 Operating Manual Download

Page: 49 / 87

Perio

ic maintenance an

justment

6-7

EAU38263

TIP



Engine air filter and V-belt air filters

• This model’s engine air filter is equipped with a disposable oil-coated paper element, which must not be cleaned

with compressed air to avoid damaging it.

• The engine air filter element needs to be replaced and the V-belt air filter elements need to be serviced more fre-

quently when riding in unusually wet or dusty areas.



Hydraulic brake service

• After disassembling the brake master cylinders and calipers, always change the fluid. Regularly check the brake fluid

levels and fill the reservoirs as required.

• Every two years replace the internal components of the brake master cylinders and calipers, and change the brake

fluid.

• Replace the brake hoses every four years and if cracked or damaged.

U2CME2E0.book Page 7 Friday, August 21, 2015 9:16 AM

Summary of Contents for MW125 2016
























































































Search results

Summary of Contents for MW125 2016

Reviews:

Related manuals for MW125 2016

Brands by name

Popular brands

Yamaha MW125 2016, Operating Manual

Search results

Summary of Contents for MW125 2016

Reviews:

Related manuals for MW125 2016

Brands by name

Popular brands