© 2015 Yamaha Corporation
Printed in China ZT49720
EN
You can use two WX-030 to reproduce stereo sound by setting each speaker as a right or left
speaker.
Set the left and right speakers separately by following the steps below.
• To use the Stereo Pair function, you need two WX-030.
• Before setting the Stereo Pair, update the dedicated app
“MusicCast CONTROLLER” and the firmware of both units
to the latest version (refer to the owner’s manual).
• Stereo Pair function does not support AirPlay.
• Stereo Pair is available only when the Network Standby
mode of the unit is enabled.
A
Connect each WX-030 to the same network by
using the dedicated app “MusicCast
CONTROLLER”.
When the WX-030 is linked to other MusicCast unit,
cancel the link by using the dedicated app “MusicCast
CONTROLLER”.
B
Tap
(power)/CONNECT of each unit to set
them to standby mode.
C
Tap and hold the following together for
3 seconds to set the left/right speakers.
1
For setting the left speaker:
and
Indicators light from right to left repeatedly (refer to
of the table on the right), and the unit enters pairing
standby mode.
2
For setting the right speaker:
and
Indicators light from left to right repeatedly (refer to
of the table on the right), and the units start pairing.
After paring is completed, the indicators light from the
center to both sides (refer to
of the table on the right),
and all indicators return to the normal status.
D
Use the dedicated app “MusicCast
CONTROLLER” to play back.
y
• You can check which speaker is the left or right speaker with
the dedicated app “MusicCast CONTROLLER” (Indicators
light as
or
of the table on the right).
• In Stereo Pair mode, you can operate one speaker to
simultaneously turn off both speakers or adjust the volume
of both speakers.
The Stereo Pair setting remains even if the speakers enter
standby mode or the power cable is unplugged and plugged
again.
Tap and hold
(or
) and
on either
speaker together for 3 seconds.
Indicators light from both sides to the center (refer to
of the table on the bottom) and Stereo Pair will be
canceled.
• The Stereo Pair can be canceled only during standby mode.
• If you cancel Stereo Pair with one of the two speakers, the
other one will be canceled automatically.
• If one of the two speakers is disconnected from the network
when canceling the Stereo Pair, cancel Stereo Pair on each
speaker.
Left
speaker
Right
speaker
WX-030
WX-030
Note
Setting/Playing back music
Note
Canceling Stereo Pair
Indicator display during the Stereo
Pair
Stereo Pair
status
Indicator display
Start Pairing/
Checking the
Left and Right
Speaker
Pairing
Completed
Canceling
Stereo Pair
Note
Left speaker
Right speaker
Right-to-Left
Left-to-Right
Center to both sides
Both sides to center
Supplement for Stereo Pair
