12
MU80 MIDI Data Format
2.1.4.4
Multi Effect1 Data parameter change
See Tables 1-1, 1-4.
2.1.4.5
Multi EQ Data parameter change
See Tables 1-1, 1-5.
2.1.4.6
Multi Effect2 Data parameter change
See Tables 1-1, 1-6.
2.1.4.7
Display Data parameter change
See Tables 1-1, 1-7.
2.1.4.8
Multi Part Data parameter change
See Tables 1-1, 1-8.
2.1.4.9
AD Part Data parameter change
See Tables 1-1, 1-9.
2.1.4.10 Drum Setup Data parameter change
See Tables 1-1, 1-10.
If operation is in XG mode, this message reinitializes all drum setup parameters.
Note that regardless of mode, drum setup parameters always reinitialize whenever the drum
set changes.
2.1.5
MU80 Native Parameter Change
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0001nnnn
1n
Device Number
01001001
49
Model ID
0aaaaaaa
aaaaaaa
Address High
0aaaaaaa
aaaaaaa
Address Mid
0aaaaaaa
aaaaaaa
Address Low
0ddddddd
ddddddd
Data
|
|
11110111
F7
End of Exclusive
Data size must match parameter size (2 or 4 bytes).
2.1.5.1
MU80 System Data parameter change
See Tables 2-1, 2-2.
2.1.5.2
Current Performance parameter change
See Tables 2-1, 2-3.
2.1.5.3
Remote Switch
See Tables 2-1, 2-4.
2.1.6
Other Parameter Changes
2.1.6.1
Master Tuning
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0001nnnn
1n
Device Number
00100111
27
Model ID
00000001
30
Sub ID2
00000000
00
00000000
00
0mmmmmmm
mm
Master Tune MSB
0lllllll
ll
Master Tune LSB
0ccccccc
cc
11110111
F7
End of Exclusive
Changes tuning of all channels.
2.2
Bulk Dump
The MU80 supports the following parameters.
[XG NATIVE ]
1) XG System Data
2) Multi Effect1 Data
3) Multi EQ Data
4) Multi Effect2 Data
5) Multi Part Data
6) AD Part Data
7) Drums Setup Data
[MU80 NATIVE ]
1) MU80 System data
2) Internal Performance
2.2.1
XG Native Bulk Data
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0000nnnn
0n
Device Number
01001100
4C
Model ID
0bbbbbbb
bbbbbbb
ByteCount
0bbbbbbb
bbbbbbb
ByteCount
0aaaaaaa
aaaaaaa
Address High
0aaaaaaa
aaaaaaa
Address Mid
0aaaaaaa
aaaaaaa
Address Low
00000000
00
Data
|
|
|
|
0ccccccc
ccccccc
Check sum
11110111
F7
End of Exclusive
For information about “Address” and “Byte Count” fields, refer to attached tables.
The checksum value is set such that the sum of Address, Byte Count, and
Checksum has value zero in its seven least significant bits.
No more than 512 bytes should be sent in a single transmission. If the Dump
Request asks for more than 512 bytes, data should be sent in packets of 512 bytes
or less, with at least 120ms between transmission of consecutive packets.
2.2.1.1
XG System Data bulk dump
See Tables 1-1, 1-2.
2.2.1.2
Multi Effect1 Data bulk dump
See Tables 1-1, 1-4.
2.2.1.3
Multi EQ Data bulk dump
See Tables 1-1, 1-5.
2.2.1.4
Multi Effect2 Data bulk dump
See Tables 1-1, 1-6.
2.2.1.5
Multi Part Data bulk dump
See Tables 1-1, 1-8.
2.2.1.6
AD Part Data bulk dump
See Tables 1-1, 1-9.
2.2.1.7
Drums Setup Data bulk dump
See Tables 1-1, 1-10.
2.2.2
MU80 Native Bulk Dump
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0000nnnn
0n
Device Number
01001001
49
Model ID
0bbbbbbb
bbbbbbb
ByteCount
0bbbbbbb
bbbbbbb
ByteCount
0aaaaaaa
aaaaaaa
Address High
0aaaaaaa
aaaaaaa
Address Mid
0aaaaaaa
aaaaaaa
Address Low
00000000
00
Data
|
|
|
|
0ccccccc
ccccccc
Check sum
11110111
F7
End of Exclusive
For information about “Address” and “Byte Count” fields, refer to attached tables.
The checksum value is set such that the sum of Address, Byte Count, and
Checksum has value zero in its seven least significant bits.
No more than 512 bytes should be sent in a single transmission.
If the Dump Request asks for more than 512 bytes, data should be sent in packets
of 512 bytes or less, with at least 120ms between transmission of consecutive
packets.
2.2.2.1
MU80 System Data bulk dump
See Tables 2-1, 2-2.
