Holder
Insert the connector so
that the tabs on the right
and left sides lock.
Tab
Expansion connector
XG Plug-in Connector
XG Plug-in Board
MU100
10
3.
Remove the four (4), black, XG Plug-in Board installation screws that are secured to the inside of the DB cover.
Unlatch and remove the holder that secures the connector. Extend the connector.
Keep the holder for use when the XG Plug-in Board is removed.
4.
Remove the XG Plug-in Board from the anti-static bag.
5.
Insert the expansion connector of the MU100 into the connector of the XG Plug-in Board.
Make sure to insert the connector so that it faces the proper direction and the right and left tabs of the expansion
connector lock into place (as shown in the illustration).
CAUTION!
Before handling the XG Plug-in Board, be sure to touch a grounded, metal surface in order to remove
any static electricity from your clothes or body. Do not touch any of the patterned surfaces of the board
or its connector.
