Yamaha MTN690-A 2019 Owner'S Manual Download Page 89 | Manualshive

Page: 89 / 98

background image

t

Motorcycle care and storage

7-3

7

4. To prevent corrosion, it is recom-

mended to apply a corrosion pro-
tection spray on all metal,
including chrome- and nickel-plat-
ed, surfaces.

5. Use spray oil as a universal clean-

er to remove any remaining dirt.

6. Touch up minor paint damage

caused by stones, etc.

7. Wax all painted surfaces.
8. Let the motorcycle dry completely

before storing or covering it.

WARNING

EWA11132

Contaminants on the brakes or tires
can cause loss of control.

t

Make sure that there is no oil or
wax on the brakes or tires.

t

If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or
acetone, and wash the tires with
warm water and a mild deter-
gent. Before riding at higher
speeds, test the motorcycle’s
braking performance and cor-
nering behavior.

NOTICE

ECA10801

t

Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.

t

Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.

t

Avoid using abrasive polishing
compounds as they will wear
away the paint.

TIP

t

Consult a Yamaha dealer for ad-
vice on what products to use.

t

Washing, rainy weather or humid
climates can cause the headlight
lens to fog. Turning the headlight
on for a short period of time will
help remove the moisture from the
lens.

EAU26183

Storage

Short-term

Always store your motorcycle in a cool,
dry place and, if necessary, protect it
against dust with a porous cover. Be
sure the engine and the exhaust sys-
tem are cool before covering the mo-
torcycle.

NOTICE

ECA10811

t

Storing the motorcycle in a
poorly ventilated room or cover-
ing it with a tarp, while it is still
wet, will allow water and humid-
ity to seep in and cause rust.

t

To prevent corrosion, avoid
damp cellars, stables (because
of the presence of ammonia)
and areas where strong chemi-
cals are stored.

Long-term

Before storing your motorcycle for sev-
eral months:

1. Follow all the instructions in the

“Care” section of this chapter.

«
...
87
88
89
90
91
...
»

Summary of Contents for MTN690-A 2019



































































































Reviews:

No comments

Related manuals for MTN690-A 2019

Brand: Yamaha Pages: 88

Brand: Miller Pages: 12

Brand: KTM Pages: 22

Brand: Honda Pages: 127

Brand: hepco & becker Pages: 2

Brand: KTM Pages: 240

Brand: Beta Pages: 41

Brand: Gilera Pages: 96

Brand: KTM Pages: 7

Brand: hepco & becker Pages: 8

Brand: Touratech Pages: 8

PRN014567-014650

Brand: ep Pages: 21

Brand: Tao Motor Pages: 47

Brand: Radio Flyer Pages: 2

Brand: Bajaj Auto Pages: 52

Shark N.39035100

Brand: OKBABY Pages: 13

Brand: hepco & becker Pages: 5

Brand: Kayoba Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands