Instrument and control functions
5-17
1
2
3
4
5
6
7
8
9
10
11
12
13
adjusting the setting levels (or on/off
status as applicable) of YRC items
PWR, TCS, SCS, QS“
”, QS“
”,
LIF, EBM, BC and ERS.
TIP
The traction control system has 5
setting levels and ERS has 6
modes.
Whenever there are more selec-
tions (setting levels or modes)
available than can be shown on
the screen at one time, a scroll bar
will appear on the righthand side of
the screen to notify you that addi-
tional selections are available by
scrolling.
PWR
Select PWR-1 for the most aggressive
throttle response, PWR-2 and PWR-3
for smoother throttle grip/engine re-
sponse, and use PWR-4 for rainy days
or whenever less engine power is desir-
able.
Traction control system
This model uses a variable traction
control system. For each setting level,
the farther the vehicle is leaned over,
the more traction control (system inter-
vention) is applied. There are 5 setting
levels available. Setting level 1 applies
the least system intervention, while set-
ting level 5 applies the most overall
traction control.
TIP
The traction control system can
only be turned off completely via
the main screen using the “MODE”
switch and MODE up “
” switch.
See “Turning off the traction con-
trol system” on page 5-14.
When the traction control system
has been turned off; TCS, SCS
and LIF will be set to OFF and can-
not be adjusted. When the traction
control system is turned on again,
these related-traction control func-
tions will return to their previous
setting levels.
1. PWR 1
2. PWR 2
3. PWR 3
4. PWR 4
5. Throttle valve opening
6. Throttle grip operation
5
6
4
3
2
1
1. System intervention
2. Lean angle
1
TCS
2
1
5
4
3
2
BGG-9-10-E0.book 17 ページ ２０２２年１月２６日 水曜日 午前１１時３７分
