Yamaha MT09M, Owner'S Manual

Page: 49 / 116

Instrument an d control functions
5-27
5
TIP
Use the special wrench and extension
bar in the tool kit to make this adjust-
ment.
Re b oun d d ampin g force
Turn the adjusting screw in direction (a)
to increase the rebound damping for-
ce.
Turn the adjusting screw in direction (b)
to decrease the rebound damping for-
ce.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the turns in di-
rection (b).
TIP
When turning the damping force ad-
juster in direction (b), it may turn be-
yond the stated specifications,
however such adjustments are ineffec-
tive and may damage the suspension.
WARNING
EWA10222
This shock a b sor b er assem b ly con-
tains hi g hly pressurize d nitro g en
g as. Rea d an d un d erstan d the fol-
lowin g information b efore han d lin g
the shock a b sor b er assem b ly.

Do not tamper with or attempt
to open the cylin
d er assem b ly.

Do not su b ject the shock a b -
sor b er assem b ly to an open
flame or other hi g h heat source.
This may cause the unit to ex-
plo
d e d ue to excessive g as
pressure.

Do not d eform or d ama g e the
cylin d er in any way. Cylin d er
d ama g e will result in poor
d ampin g performance.
1. Spring preload adjusting ring
2. Extension bar
3. Special wrench
4. Position indicator
Sprin g preloa d settin g :
Minimum (soft):
1
Standard:
4
Maximum (hard):
7
7 6 5 4
3 2 1
4
1 1 1
2 2
3 3
(a) (a) (a)
(b) (b) (b)
1. Rebound damping force adjusting screw
Re b oun d d ampin g settin g :
Minimum (soft):
2 1/2 turn(s) in direction (b)
Standard:
1 turn(s) in direction (b)
Maximum (hard):
0 turn(s) in direction (b)
1 (a)
(b)
UB7N10E0.book Page 27 Wednesday, October 14, 2020 10:14 AM