Yamaha MT07M Owner'S Manual Download Page 42

Page: 42 / 108

Instrument an

control functions

4-24

With the engine turned off:
1. Move the sidestand down.
2. Set engine stop switch to run position.
3. Turn main switch to on position.
4. Shift transmission into neutral.
5. Push the start switch.

Does the engine start?

With the engine still running:
6. Move the sidestand up.
7. Pull the clutch lever.
8. Shift transmission into gear.
9. Move the sidestand down.

Does the engine stall?

After the engine has stalled:
10. Move the sidestand up.
11. Pull the clutch lever.
12. Push the start switch.

Does the engine start?

The system is OK.

The motorcycle can be ridden.

YES

The neutral switch may not be working.

The motorcycle should not be ridden

until

checked by a Yamaha dealer.

The clutch switch may not be working.

The motorcycle should not be ridden

until

checked by a Yamaha dealer.

The sidestand switch may not be working.

The motorcycle should not be ridden

until

checked by a Yamaha dealer.

If a malfunction is found, have the vehicle
inspected before riding.

WARNING

UBAT10E0.book Page 24 Friday, November 6, 2020 6:08 PM

Summary of Contents for MT07M













































































































Search results

Summary of Contents for MT07M

Reviews:

Related manuals for MT07M

Brands by name

Popular brands

Yamaha MT07M, Owner'S Manual

Search results

Summary of Contents for MT07M

Reviews:

Related manuals for MT07M

Brands by name

Popular brands