Periodic maintenance and adjustment
7-13
1
2
3
4
5
6
7
8
9
10
11
12
7. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
8. Refill with the specified amount of
the recommended engine oil.
TIP
Wipe off any spilled oil before starting
the engine.
9. Check the O-ring for damage, and
then install the oil filler cap.
10. Start the engine and let it idle for
several minutes while checking for
oil leakage. If any leakage is
found, immediately stop the en-
gine and check for the cause.
TIP
After the engine is started, the oil pres-
sure warning light should go off if the oil
level is sufficient.
NOTICE
ECA20860
If the oil pressure warning light flick-
ers or remains on even if the oil level
is correct, immediately turn the en-
gine off and have a Yamaha dealer
check the vehicle.
11. Turn the engine off, wait a few min-
utes until the oil settles, and then
check the oil level one last time.
Tightening torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 13 lb·ft)
Tightening torque:
Engine oil drain bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
1. Engine oil filler cap
2. O-ring
1
2
B67-9-E4.book 13 ページ ２０１９年７月１９日 金曜日 午後４時２３分
