Instrument and control functions
4-10
1
2
3
4
5
6
7
8
9
10
11
12
ments of the fuel meter disappear from
“F” (full) towards “E” (empty) as the fuel
level decreases. When the last seg-
ment starts flashing, refuel as soon as
possible.
TIP
If a problem is detected in the electrical
circuit, the fuel level segments and “
”
will flash repeatedly. If this occurs, have
a Yamaha dealer check the vehicle.
Coolant/Air temperature display
Push the “SELECT” switch for two sec-
onds to switch the display between the
coolant temperature mode “
C” and air
temperature mode.
Coolant temperature
This mode shows the coolant tempera-
ture from 40
C to 124
C in 1
C incre-
ments.
If the message “Hi” flashes, stop the ve-
hicle, then stop the engine, and let the
engine cool. (See page 7-36.)
TIP
When the coolant temperature is
below 40
C, “Lo” will be displayed.
The coolant temperature varies
with changes in the weather and
engine load.
Air temperature
This mode shows the air temperature
from –9
C to 50
C in 1
C increments.
TIP
–9
C will be displayed even if the
air temperature falls below –9
C.
The temperature displayed may
vary from the actual ambient tem-
perature.
1. Select switch “SELECT”
RE
S
SE
T
PA
SS
TC
S
SELECT
1
1. Coolant temperature display
1
1. Air temperature display
1
B67-9-E4.book 10 ページ ２０１９年７月１９日 金曜日 午後４時２３分
