–22–
IGNITION SYSTEM
ELEC
6. Crankshaft position sensor resistance
S
Disconnect the crankshaft position sensor
coupler from the wire harness.
S
Connect the pocket tester (
Ω
100) to the
crankshaft position sensor coupler as shown.
Positive tester probe
!
gray
Negative tester probe
!
black
1
2
S
Measure the crankshaft position sensor
resistance.
Crankshaft position sensor
resistance
248
X
372
Ω
at 20
_
C (68
_
F)
(between gray and black)
S
Is the crankshaft position sensor OK?
YES
NO
Replace the
crankshaft position
sensor.
EAS00749
7. Main switch
S
Check the main switch for continuity.
Refer to “CHECKING THE SWITCHES”.
S
Is the main switch OK?
YES
NO
Replace the main
switch.
EAS00748
EAS00750
8. Engine stop switch
S
Check the engine stop switch for continuity.
Refer to “CHECKING THE SWITCHES”.
S
Is the engine stop switch OK?
YES
NO
Replace the right
handlebar switch.
EAS00751
9. Neutral switch
S
Check the neutral switch for continuity.
Refer to “CHECKING THE SWITCHES”.
S
Is the neutral switch OK?
YES
NO
Replace the neutral
switch.
EAS00752
10. Sidestand switch
S
Check the sidestand switch for continuity.
Refer to “CHECKING THE SWITCHES”.
S
Is the sidestand switch OK?
YES
NO
Replace the side-
stand switch.
EAS00763
11. Clutch switch
S
Check the clutch switch for continuity.
Refer to “CHECKING THE SWITCHES”.
S
Is the clutch switch OK?
YES
NO
Replace the clutch
switch.
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: [email protected]