background image

223

MOTIF  Reference

Pattern Record mode

Reference

  

Patter

n mode

• Quantize

This convenient feature lets you automatically quantize 
the notes in real time, as you record. Quantize aligns the 
timing of note events to the nearest beat. This parameter 
determines whether real-time Quantize is on or not, and 
the resolution to which the notes will be aligned.

Settings:  off, 60 (32nd note), 80 (16th note triplet), 120 

(16th note), 160 (8th note triplet), 240 (8th 
note), 320 (1/4 note triplet), 480 (1/4 note)

• Event

This parameter is available when the Recording Type is set 
to “step.” This lets you specify the event type to be 
entered. 

Settings:  note, p.bend (pitch bend), CC#000~#119 

(Control Change)

• Tempo

Determines the Pattern tempo. 

Settings: 001.0 

~300.0

 [F2] Pattern Record  Voice

From this display you can set voice-related 
parameters for the selected track.  The settings 
made here affect the tone generator parts whose 
MIDI receive channels match the MIDI transmit 
channel of the song track.  The voice set here 
becomes the phrase voice (page 52).

Parameters are the same as in the Song Record 
mode. See page 188. 

 [F3] Pattern Record Arpeggio

From this display you can set various Arpeggio-
related parameters for the selected track.

Parameters are the same as in the Song Record mode. 
See page 189. 

Pattern Recording

The explanations here apply to steps #5 - #6 of the 
Basic Procedure on page 222.

 Realtime Recording

See “Quick Start Guide” on page 103. 

 Step Recording

If you press the [

F

] button in step #5 of the Basic 

Procedure on page 222 , the Event display appears and 
you can input individual events one by one.  The 
method for inputting events is the same as in Step 
recording in the Song mode. See pages 183 ~ 186. 

Determines whether Arpeggio playback
data is recorded to the track or not. 
(Press the [F4] button.)

Summary of Contents for MOTIF6 Voice Editor













































































































































































































































































































Reviews: