manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Owner'S Manual

The Yamaha MOTIF6 Voice Editor is a powerful software tool that allows users to easily customize and edit the voices of their Yamaha MOTIF6 synthesizer. With this intuitive manual, available for free download at manualshive.com, users can explore endless possibilities and enhance their music production experience.

Share
Download
background image

189

MOTIF  Reference

Song Edit mode

Reference

  

Song mode

• Voice 

Determines the voice for the selected track. 
You can use the BANK, GROUP, NUMBER button or the 
Category Search function to select a voice (page 124). You 
can also select a Sample voice (page 58). 

• Voume 

Determines sound volume for the selected track. 

❏

Settings

0~127

• Pan 

Determines the stereo pan position the selected track. 

❏

Settings

L63 (Left) ~ C (Center) ~ R63 (Right)

• InsEF (Insertion Effect Part Switch)

Determines whether the Insertion effect (page 39) for the 
selected track is on or off.

❏

Settings

on, off

●

 [F3] Song Record  Arpeggio

From this display you can set various Arpeggio-
related parameters for the selected track.

• Bank 

Determines the specific Arpeggio Bank.  For details, see 
page 55.

❏

Settings

pre1, pre2, user

• Type 

Determines the Arpeggio type.  The two-letter prefix before the 
name indicates the general Arpeggio category. (page 55 )

• Velocity Limit 

Determines the lowest and highest velocity in the 
Arpeggio’s velocity range. While recording, this lets you 
control when the Arpeggio sounds by your playing 
strength.

❏

Settings

1~127

• Switch 

Determines whether Arpeggio playback is on or off.  You 
can also turn this on or off from the front panel with the 
[ARPEGGIO ON/OFF] button.

❏

Settings

off, on

• Hold 

Determines whether the Arpeggio playback is “held” or 
not.  When this is set to “on,” the Arpeggio cycles 
automatically, even if notes are released, and it continues 
to cycle until the next note data is received.  

❏

Settings

sync-off, off, on

• PartSwitch 

Determines whether Arpeggio playback is on or off for the 
tone generator part (page 55) that corresponds to the 
recorded track. 

❏

Settings

off, on

Song Edit mode

This mode gives you comprehensive, detailed controls 
for editing the MIDI events of individual song tracks.  
MIDI events are messages (such as note on/off, note 
number, program change number, etc.) that make up 
the data of a recorded song.

◆

 Basic Procedure

Basic Operation (page 70)

1

  In the Song Play mode, select a User Song to be 

edited. 

2

  Press the [EDIT] button to enter the Song Edit 

mode.  (The indicator lights.)  The Song event List 
display shown below appears.

3

  Revise, insert or delete the MIDI events as needed.  

If you find the display too cluttered, you can filter 
out certain event types with the View Filter.  
Simply press the [F2] button and select the event 
types you want to be displayed.

4

  After completing editing, press the [SONG] button 

to return back to the Song Play mode. 

5

  Press the [

F

] button to hear your edited data. 

6

  Edit other tracks as required. Repeat steps #2 

through #5 as desired. 

7

  After editing, save your song data to the Memory 

Card or the SCSI device connected to the MOTIF 
in the File mode. 

• For detailed instructions on step #3, see the 

following explanations. 

• For details on step #7, refer to “File mode” on 

page 266.

Determines whether Arpeggio playback data is 
recorded to the track or not. (Press the [F4] button.)

EDIT

Events

Measure
number

Clock
(480 clocks per quarter-note)

Beat

Summary of Contents for MOTIF6 Voice Editor













































































































































































































































































































Reviews:

No comments

Related manuals for MOTIF6 Voice Editor

Halcro RS232 Specification preview
RS232
Brand: Halcro Pages: 12
AMX Modero ViewPoint MVP-5100 Operation/Reference Manual preview
Modero ViewPoint MVP-5100
Brand: AMX Pages: 190
American DJ myDMX 2.0 User Instructions preview
myDMX 2.0
Brand: American DJ Pages: 21
ROUTE 66 MAPS User Manual preview
MAPS
Brand: ROUTE 66 Pages: 28
Fortinet FortiClient Datasheet preview
FortiClient
Brand: Fortinet Pages: 4
Alcatel VitalQIP Specifications preview
VitalQIP
Brand: Alcatel Pages: 4
Seagate ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive Specifications preview
ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive
Brand: Seagate Pages: 2
Sony D-NE329SP - Atrac Cd Walkman Portable Player Specifications preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Specifications preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 2
Sony D-NE326CK - Atrac Cd Walkman Portable Player Specifications preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE329SP - Atrac Cd Walkman Portable Player Service Manual preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 32
Sony D-NE1 - Portable Cd Player Service Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 34
Sony D-NE326CK - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 35
Sony D-NE1 - Portable Cd Player Operating Instructions Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 116
ARRI Laptop Camera Controller flex LCC Basics Manual preview
Laptop Camera Controller flex LCC
Brand: ARRI Pages: 10
Red Hat Cluster Suite Manual preview
Cluster Suite
Brand: Red Hat Pages: 188
AVG Anti-Virus Business Edition 2011 User Manual preview
Anti-Virus Business Edition 2011
Brand: AVG Pages: 267
YASKAWA XTRAWARE - V3.0 Manual preview
XTRAWARE - V3.0
Brand: YASKAWA Pages: 263

Brands by name

Popular brands

Load more brands