manualshive.com logo in svg

Yamaha MOTIF ES6, Owner'S Manual

Share
Download
Yamaha MOTIF ES6 Owner'S Manual Download Page 280

Troubleshooting

280

Owner’s Manual

Appendix

Pitch or intervals are wrong

• Is the Master Tune parameter in the [UTILITY] 

→

 [F1] GENERAL 

→

 [SF1] TG display set to a value other than “0”?.......................................... page 260

• Is the Note Shift parameter in the [UTILITY] 

→

 [F1] GENERAL 

→

 [SF1] TG display set to a value other than “0”?.............................................. page 260

• When the Voice produces a wrong pitch, check the Micro Tuning setting in the [VOICE] 

→

 [EDIT] 

→

 [COMMON] 

→

 [F1] GENERAL 

→

 [SF2] PLY MODE display.

 .... page 190

• When the Voice produces a wrong pitch, is the LFO Pitch Modulation Depth in the Voice Edit mode set too high? ............................................ page 201

• When the Performance produces a wrong pitch, is the Note Shift parameter of each Part set to a value other than “0”? ................................... page 218

• When the Performance produces a wrong pitch, is the Detune parameter of each Part set to a value other than “0”? ....................................... page 218

• When the Song/Pattern playback produces a wrong pitch, is the Note Offset parameter in the Groove display set to a value other than “0”? .................... page 114

No effect is applied

• Is the [EFFECT BYPASS] button turned off? ........................................................................................................................................................... page 177

• Have the [REVERB] and [CHORUS] knobs been turned fully counter-clockwise (to the minimum)? ...................................................................... page 50

• Have any or all of the Elements’ Effect Output parameters been set to “thru” in the effect setting display in the Voice Edit mode? .................... page 194

• Have any or all of the effect types been set to “thru” or “off”?................................................................................................................................ page 179

• When this occurs in the Performance mode/Song mode/Pattern mode, check whether the Insertion Switch (INS SW) parameters are set properly or not.  ........pages 216, 235

The Edit Indicator appears, even when parameters are not being edited

• Keep in mind that even though the Voice Play mode or Performance Play mode is active, simply moving a Knob or Slider changes the current Voice or 

Performance, automatically displaying the Edit indicator. ................................................................................................................................pages 65, 69

• In the Song Mixing mode or Pattern Mixing mode, keep in mind that simply playing back a Song or Pattern may change the Mixing parameters of the 

current Song/Pattern, automatically displaying the Edit indicator. ......................................................................................................................... page 104

Arpeggio problems

■ 

Cannot start the Arpeggio

Check whether the [ARPEGGIO ON/OFF] button is turned on or off. When the Arpeggio doesn’t start even though the button is  
turned on, check the following points. 

• When the User Arpeggio type is selected, does the currently selected Arpeggio actually contain data?............................................................ page 189

• Are the Arpeggio related parameters such as Note Limit and Velocity Limit set appropriately? ........................................................................... page 191

• When this situation occurs in the Performance mode, check the ArpSwitch parameters for all Parts in the [PERFORM] 

→

 [EDIT] 

→

 Part selection 

→

 [F1] 

VOICE 

→

 [SF2] MODE display. If parameters of all Parts are turned off, the Arpeggio will not be played back even if the [ARPEGGIO ON/OFF] button is 

turned on. ............................................................................................................................................................................................................... page 216

• When this situation occurs in the Song mode/Pattern mode, check the ArpSwitch parameter in the [SONG] or [PATTERN] 

→

 [MIXING] 

→

 [EDIT] 

→

 Part 

selection 

→

 [F1] VOICE 

→

 [SF2] MODE display. If this parameter for the current Part is turned off, Arpeggio playback will not be triggered by your 

keyboard performance even if the [ARPEGGIO ON/OFF] button is turned on.  .................................................................................................... page 235

■ 

Cannot stop the Arpeggio

• When Arpeggio playback does not stop even if you release the key, set the Arpeggio Hold parameter to “off.”  ................................................ page 191

n

For details and a list of the Arpeggio related functions, see page 169. 

Song/Pattern problems

■ 

The Song/Pattern cannot be started even when pressing the [

F

] (Play) button. 

• Does the selected Song or Pattern (phrase) actually contain data? .................................................................................................................pages 57, 59

• Is the Remote Control feature turned on? ............................................................................................................................................................... page 147

• Is the MIDI sync parameter set to internal (using internal clock) in the [UTILITY] 

→

 [F5] MIDI 

→

 [SF3] SYNC display? ..................................... page 264

■ 

Song/Pattern (Phrase) cannot be recorded.

• Is there enough free memory for recording? The total MOTIF ES memory capacity determines the number of Songs/Patterns (phrases) that can be 

recorded. For example, if the memory contains Songs/Patterns (phrases) that use up a large amount of memory, the memory may become full even 

though the available Pattern or Song numbers are not all used. ........................................................................................................................... page 275

• In the Pattern Record mode, does the specified track to which the Phrase is assigned have preset data? Recording cannot be done to a track that 

contains preset data. .............................................................................................................................................................................................. page 113

■ 

Cannot enter the Pattern Job mode even when pressing the [JOB] button in the Pattern mode. 

• Check whether the MOTIF ES is in the Patter n Chain mode or not. If so, exit from the Pattern Chain mode, then press the [JOB] button. .................. page 115

■ 

Cannot enter the Pattern Mixing mode even when pressing the [MIXING] button in the Pattern mode. 

• Check whether the MOTIF ES is in the Patter n Chain mode or not. If so, exit from the Pattern Chain mode, then press the [MIXING] button. ........................ page 115

Summary of Contents for MOTIF ES6













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands