Yamaha MONTAGE M6, Quick Manual

Page: 41 / 56

39
MONTAGE M Quick Guide
By using the touchscreen
Tap the appropriate tab shown on the touchscreen.
Moving the cursor and changing parameter values
Use the four cursor buttons on the dial ring to move the cursor on the touchscreen in four directions.
You can move the cursor by touching the item shown on the touchscreen.
Change the parameter value at the cursor position by using the data dial, [INC/YES] button, and [DEC/NO] button.
For parameters with large value ranges, you can increase the value by 10 by holding down the [SHIFT] button and pressing the
[INC/YES] button. To decrease by 10, hold down the [SHIFT] button and press the [DEC/NO] button.
By moving a cursor position to a different row of the parameters using the up and down buttons, you can control a different set
of parameters using the display knobs
Edit
Common
1 2 3 4 5 6 7 8
FX
90
General
/ Pitch
Perf
Settings
Filter
/ Amp
Effect
Arp / MS
Control
Audio ln Pitch
Zone
Overview
USB
Monitor
Main Category
Main Category Sub Category Performance Name
Sub Category
Piano Acoustic CFX + FM EP
[
T
]
Cursor buttons Data dial
Decreases
number
Increases
number
1. Move the cursor up and down to
select a different row.
2. Use the display knobs to control
the indicated parameters.