Edit
MONTAGE Reference Manual
68
Reference
Ins Connect (Insertion Connection Type)
Determines the effect routing for Insertion Effects A and B. The setting changes are shown on the diagram
in the display, giving you a clear picture of how the signal is routed. For details, see the section “Effect
connection” (
) of the “Basic Structure.”
Settings:
Parallel, Ins A
B, Ins B
A
Rev Send (Reverb Send)
Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the
Reverb effect. This is available only when “Part Output” is set to “MainL&R.”
Settings:
0 – 127
Var Send (Variation Send)
Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the
Variation effect. This is available only when “Part Output” is set to “MainL&R.”
Settings:
0 – 127
Part Output (Part Output Select)
Determines the specific audio output.
Settings:
MainL&R, AsgnL&R, USB1&2…USB29&30, AsgnL, AsgnR, USB1 – 30, Off
MainL&R:
Outputs in stereo (two channels) to the OUTPUT [L/MONO]/[R] jacks.
AsgnL&R:
Outputs in stereo (two channels) to the ASSIGNABLE OUTPUT [L]/[R] jacks.
USB1&2
…
USB29&30:
Outputs in stereo (Channels 1&2 – 29&30) to the [USB TO HOST] terminal.
AsgnL:
Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [L] jack.
AsgnR:
Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [R] jack.
USB1 – 30:
Outputs in mono (Channels 1 – 30) to the [USB TO HOST] terminal.
Off:
No audio signal for the Part is output.
Envelope Follower
Calls up the Envelope Follower setting display. For details on the Envelope Follower, see the “Envelope
Follower Block” (
) in the “Basic Structure.”
Part (Input Source)
Displays the Part as “Input Source” for the selected Envelope Follower.
Settings:
Master, AD, Part 1 – Part 16
Gain (Envelope Follower Gain)
Determines the Input gain of the Input Source set in “Part.”
Settings:
-24dB – 0dB – +24dB
Attack (Envelope Follower Attack)
Determines the attack time of the Envelope Follower.
Settings:
1ms – 40ms