Yamaha midnight star XVS1300A Owner'S Manual Download Page 56 | Manualshive

Page: 56 / 90

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

6-14

6

TIP

Make sure that the coolant reservoir
breather hose is properly routed
through the guide.

EAU33031

Changing the coolant

The coolant must be changed at the in-
tervals specified in the periodic mainte-
nance and lubrication chart. Have a
Yamaha dealer change the coolant.

WARNING! Never attempt to remove
the radiator cap when the engine is
hot.

[EWA10381]

EAU42442

Replacing the air filter element

The air filter element should be re-
placed at the intervals specified in the
periodic maintenance and lubrication
chart. Replace the air filter element
more frequently if you are riding in un-
usually wet or dusty areas.

1. Remove the air filter case cover by

removing the bolts.

2. Pull the air filter element out.

3. Insert a new air filter element into

the air filter case.

NOTICE:

Make

sure that the air filter element is
properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.

[ECA10481]

4. Install the air filter case cover by in-

stalling the bolts.

1. Guide

2. Coolant reservoir breather hose

1

2

1. Air filter case cover

2. Bolt

1. Air filter element

U11CE4E0.book Page 14 Friday, December 3, 2010 9:12 AM

«
...
54
55
56
57
58
...
»

Summary of Contents for midnight star XVS1300A



























































































Reviews:

No comments

Related manuals for midnight star XVS1300A

750 Sport Bevel Heaven

Brand: Ducati Pages: 235

Brand: Öhlins Pages: 2

Brand: hepco & becker Pages: 5

TRIUMPH Bonneville T 120

Brand: hepco & becker Pages: 4

Mesh Helmet Cover

Brand: Ops-Core Pages: 2

Brand: XPOtool Pages: 4

Brand: Yamaha Pages: 215

Brand: Yamaha Pages: 319

Brand: Yamaha Pages: 688

XMAX YP250R 2013

Brand: Yamaha Pages: 94

Brand: BMW Pages: 19

Brand: hepco & becker Pages: 2

Brand: DYNATEK Pages: 3

Brand: DYNATEK Pages: 2

Brand: hepco & becker Pages: 2

Brand: hepco & becker Pages: 3

Brand: Thunderbike Pages: 8

Brand: Buell Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands