19
ENGLISH
Part Erase
This operation lets you erase part of a track.
1
Press
#
PLAY/
*
PAUSE
to play the track
containing the part you want to erase.
2
Use
SEARCH
!
or
⁄
to locate the beginning
of the part you want to erase (point A), then press
#
PLAY/
*
PAUSE
to pause at that point.
3
Press
EDIT
repeatedly to display “A–B Erase?”,
then press
ENTER
.
Point A (from step 2) is registered and “Erase A–_” appears in
the display.
4
Use
#
PLAY/
*
PAUSE
and
SEARCH
⁄
to
locate the end of the part you want to erase (point
B).
5
Press
ENTER
to register point B.
“Check” appears, then the part you specified plays
repeatedly and “Erase A–B?” appears in the display.
To adjust point B
Turn the jog dial while the “B” of “Erase A–B?” is blinking
Point B can be adjusted up to 2 second (176 steps) in either
direction.
6
Press
ENTER
again.
The part is erased and “Complete” appears momentarily.
To cancel before erasing the part
Press
CANCEL
(or
&
STOP
).
To undo ERASE
1
Press
&
STOP
to set this unit to stop mode.
2
Press
EDIT
repeatedly to display “Undo Erase”, then
press
ENTER
.
“Undo OK ?” appears in the display.
3
Press
ENTER
again to undo.
To cancel, press
CANCEL
(or
&
STOP
).
To erase parts spanning more than one track
Use the COMBINE function described below to combine
the tracks into one track before performing this operation.
Note
After part erase, a new track number is automatically assigned to
the section starting after point B.
3
3,4
2
COMBINE
This function lets you combine two consecutive tracks into
one. After you combine the tracks, the total number of
tracks decreases by one and the tracks following the
combined tracks are renumbered.
1
Press
&
STOP
to stop playback.
2
Turn the jog dial to select the second track of the
two you want to combine.
3
Press
EDIT
repeatedly to display “Combine ?”,
then press
ENTER
.
“Check” appears momentarily, then the unit plays the 4
seconds before and after the point where the tracks will be
connected. “(track number) + (track number) OK?” appears in
the display.
4
Press
ENTER
again.
The tracks are combined and “Complete” appears
momentarily.
To cancel before combining the tracks
Press
CANCEL
(or
&
STOP
).
To undo COMBINE
1
Press
&
STOP
to set this unit to stop mode.
2
Press
EDIT
repeatedly to display “UndoCombine”, then
press
ENTER
.
“Undo OK ?” appears in the display.
3
Press
ENTER
again to undo.
To cancel, press
CANCEL
(or
&
STOP
).
Notes
• This operation is not possible when track 1 is selected.
• You can also divide the track later using the DIVIDE function.
• If “Can’t Edit” appears in the display the tracks cannot be
combined. This sometimes happens when you have edited
the same track many times. This is due to the technical
limitations of the MD system and is not a mechanical error or
malfunction.
CANCEL
TIMER
OFF
PLAY
REC
POWER
DISPLAY
TITLE
CHARA.
DELETE
EDIT
SET
CANCEL
ENTER
INPUT
REC LEVEL
SEARCH
STOP
#
*
REC
+
—
NATURAL SOUND MINIDISC RECORDER MDX-9
0
10
PLAY/
PAUSE
&
⁄
!
›
$
)
s
1
