TROUBLESHOOTING
17
En
ADDITIONAL
INF
O
RMATION
Engl
ish
Problem
Cause
Remedy
page
No sound.
The power of the unit is off.
Connect the power cable correctly.
—
The iPod software version has not been
updated.
Download the latest iTunes software to update the
iPod software version to the latest.
—
The iPod is in the process of connecting
with the unit.
Please wait for a while.
—
MCR-140: The battery of the iPod is low.
Charge the iPod.
—
MCR-140: The iPod is not connected to
the transmitter firmly.
Connect the iPod firmly.
—
MCR-140: Earphones are connected to
the iPod.
Remove the earphones.
—
MCR-140: The signal from the
transmitter is blocked by your body or
metallic objects, etc.
Change the way of holding, the orientation, or the
position of the transmitter to avoid your body or
metallic objects blocking the signal.
—
MCR-140: There is a device (microwave
oven, wireless LAN, cordless telephone,
etc.) outputting signals in the 2.4 GHz
frequency band nearby.
Place the unit away from these devices, or turn them
off. If the device is IEEE802.11n-compliant, change
the channel setting of the device so as not to affect
the unit.
—
MCR-140: Distance is too far.
Move the transmitter closer to the unit. Transmission
range is approximately 10 m (32.8 ft). Also, placing
the unit in a lower position makes it easier to receive
wireless signals.
—
MCR-140: The unit and transmitter are
not connected since they are set to
different groups.
Set both the unit and transmitter to the same group.
MCR-140: The unit is connected to
another unit.
Select a different group by changing the group
setting of the unit and transmitter.
No sound.
The iPod sounds, but
you cannot operate it
with the unit or the
remote control.
MCR-040: The iPod is set in the iPod
dock improperly.
Remove the iPod from the unit, then set it in the iPod
dock again.
MCR-140: The iPod is not connected to
the transmitter properly.
Remove the iPod from the transmitter, then set it to
the transmitter again.
Cannot change the
volume by changing
the volume of the
iPod.
The iPod display
does not change by
pressing the remote
control volume keys.
The unit cannot be
operated by the
remote control.
The iPod is not supported by this unit.
Only iPod (5th generation), iPod classic, iPod nano,
and iPod touch are supported.
The iPod is not connected correctly.
Connect the iPod firmly.
—
The iPod software version is out of date.
Update the iPod software version to the latest. If the
problem cannot be solved, even with the latest
software, reset the iPod.
—
You cannot operate
from the iPod.
MCR-040: The iPod is set in the iPod
dock improperly.
Remove the iPod from the unit, then set it in the iPod
dock again.
MCR-140: The iPod is connected to the
transmitter improperly.
Remove the iPod from the transmitter, and connect
to the transmitter again, then start playback.
The playback
information is not
displayed on the
front panel display.
The iPod you set is not compatible with
the playback information display.
Only iPod (5th generation), iPod classic, iPod nano,
and iPod touch are supported.
You are using MCR-140.
Only MCR-040 is available for playback information
display.
—
The iPod does not
charge up.
MCR-040: The iPod is set in the iPod
dock improperly.
Remove the iPod from the unit, then set it in the iPod
dock again.
MCR-140: The iPod is set in the charging
cradle improperly.
Remove the iPod from the unit, then set it in the
charging cradle again.
