Yamaha MCR-040DG Owner'S Manual Download

Page: 11 / 26

PERAT

IO
N

Engl

ish

OPERATION

• This unit has an automatic standby function, which will automatically switch the unit to standby mode if the unit is left turned on for

1 hour without playback or any other operation being performed. This function is not available when the source is set to PORTABLE/
FM.

• Press to set the unit to standby mode. All the information on the front panel display is not displayed in standby mode. This can

reduce power consumption. To turn on the unit, press

, or start playback with your iPod connected to the transmitter (MCR-140

only).

• If the iPod selected as the input source is disconnected from the transmitter, or does not output sound for a certain period, the unit will

automatically switch to standby mode (MCR-140 only).

FRONT PANEL AND BASIC OPERATION

PORTABLE

VOLUME

INPUT

iPod

USB

iPod dock

Unit standby/on

Disc tray open/close

Play/pause playback

Stop playback

INPUT button:

Press repeatedly to choose the input source.

VOLUME

USB port:

☞

P. 5, 8

3.5 mm stereo mini
plug cable

PORTABLE:

Connecting headphones

Press the INPUT button repeatedly
to select PORTABLE. Then start
playback on the connected portable
audio device.

No sound is output from the speakers
when headphones are connected.

Down

MCR-140

Disc tray

MCR-040

Charging cradle

Summary of Contents for MCR-040DG



























Search results

Summary of Contents for MCR-040DG

Reviews:

Related manuals for MCR-040DG

Brands by name

Popular brands

Yamaha MCR-040DG, Owner'S Manual

Search results

Summary of Contents for MCR-040DG

Reviews:

Related manuals for MCR-040DG

Brands by name

Popular brands