Yamaha Mark IV, Operating Manual

Page: 61 / 122

CHAPTER 4: Recording
49
This function is used to compensate for slight
inaccuracies in the playing data (the length of a note and
the timing of the key stroke). A measure is equally
divided into a certain number of sections (4, 6, 8, 12, and
16 sections) and the key strokes are fit exactly into the
sections. In the Disklavier, each section indicates a
quarter note.
Quantize Function
1
Perform steps
1
and
2
of “Recording
Songs Based on Measures and Beats
(Metronome Mode Recording)”. (
→
pg. 48)
2
Tap on the desired song in the list that
appears.
3
Tap on repeatedly until the
following screen appears.
4
Tap on [Quantize], and then press
to select the desired option
([1/4], [1/6], [1/8], [1/12], [1/16]).
The lower number of the fraction indicates the
number of sections a measure is evenly divided
into.
5
Press .
The metronome starts clicking.
6
Play the Disklavier along with the
metronome.
Recording starts automatically.
7
After playing the Disklavier, press
to stop recording.
To cancel Quantize function,
select [OFF]
in step
4
.
Measure-number
counter starts.