manualshive.com logo in svg

Yamaha MAJESTY YP250A, Owner'S Manual

Share
Download
Yamaha MAJESTY YP250A Owner'S Manual Download Page 89

6-38

PERIODIC MAINTENANCE AND MINOR REPAIR

6

4. Unhook the headlight bulb hold-

er, and then remove the defec-
tive bulb.

EW000119

w

Headlight bulbs get very hot.
Therefore, keep flammable prod-
ucts away from a lit headlight bulb,
and do not touch the bulb until it
has cooled down.

1

1.

Headlight bulb holder

EC000105

c

C

Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the
bulb, and the bulb life will be
adversely affected. Thoroughly
clean off any dirt and fingerprints
on the headlight bulb using a cloth
moistened with alcohol or thinner.

6. Install the headlight bulb cover,

and then connect the coupler.

a

a.

Do not touch the glass part of the bulb.

5. Place a new headlight bulb into

position, and then secure it with
the bulb holder.

5SJ-28199-E1  7/11/02 11:03 AM  Page 87

Summary of Contents for MAJESTY YP250A





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands