manualshive.com logo in svg

Yamaha MAJESTY YP250A, Owner'S Manual

Share
Download
Yamaha MAJESTY YP250A Owner'S Manual Download Page 102

7-5

SCOOTER CARE AND STORAGE

7

5. Lubricate all control cables and

the pivoting points of all levers
and pedals as well as of the
sidestand/centerstand.

6. Check and, if necessary, correct

the tire air pressure, and then lift
the scooter so that both of its
wheels are off the ground.
Alternatively, turn the wheels a
little every month in order to pre-
vent the tires from becoming
degraded in one spot.

7. Cover the muffler outlet with a

plastic bag to prevent moisture
from entering it.

8. Remove the battery and fully

charge it. Store it in a cool, dry
place and charge it once a
month. Do not store the battery
in an excessively cold or warm
place [less than 0 °C or more
than 30 °C]. For more informa-
tion on storing the battery, see
page 6-35.

NOTE:

Make any necessary repairs before
storing the scooter.

5SJ-28199-E1  7/11/02 11:03 AM  Page 100

Summary of Contents for MAJESTY YP250A





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands