M7CL
Quick Start Guide Part 1
6
Initialization
To initialize the console power up whilst holding down the Scene [STORE] button. Keep holding the [STORE] button
until the screen shows a pop-up with an invitation to Initialize all memories. After confi rming the initialization exit
to the normal boot up sequence.
Power on,
holding
[STORE]
Getting sound from M7CL-32/48 in 10 easy steps.
1
4
2
3
5
6
7
8
9
1
Connect a mic or other source (CD
etc) to a chosen input (eg 1)
2
Connect your main L&R to the Out-
puts 15(L) and 16(R). (7 and 8 for
M7CL-48ES).
3
Press the blue [SEL] button to select
the channel and assign the encoders.
4
Turn the HA or Headamp gain encoder
to set the gain using the channel meter.
5
Keep the signal below the red “OVER”
at all times.
6
Check the channel is ON and
7
push
up the fader.
8
Check the Stereo master (pink) chan-
nel is turned ON and
9
push up the
fader.
10
You should have sound at your
outputs. If not, check the trouble
shooting ideas on page 19!
