Yamaha LZ300, Owner'S Manual

Page: 84 / 102

Maintenance
78
between the (-) terminals of the starting
battery and accessory battery. See the
illustrations of the wiring connections.
This cable must be made from wire
thicker than the starting battery cable.
WARNING
EWM00600
Use of smaller wire could lead to a fire.
NOTE:
If a battery selector switch is desired, consult
your Yamaha dealer about correct wiring.
EMU29370
Disconnecting the battery
Disconnect the BLACK cable from the NEG-
ATIVE (-) terminal first. Then disconnect the
RED cable from the POSITIVE (+) terminal.
EMU29391
Checking top cowling
CAUTION:
ECM01650
Be sure the cowling is closed securely
and that there are no gaps. A loose or im-
properly fitting cover could allow water
into the engine.
Check the fitting of the top cowling by push-
ing it with both hands. If it is loose have it re-
paired by your Yamaha dealer.
EMU29400
Coating the boat bottom
A clean hull improves boat performance. The
boat bottom should be kept as clean of ma-
rine growth as possible. If necessary, the
boat bottom can be coated with an anti-foul-
ing paint approved for your area to inhibit
marine growth.
Do not use anti-fouling paint which includes
copper or graphite. These paints can cause
more rapid engine corrosion.
1. Battery for accessories
2. Battery for starting
3. Large black lead
4. Large red lead for starting battery
5. Negative connecting cable
6. Power for accessories
7. Small red lead for accessory battery charg-
ing (optional part)
7
ZMU01942
4
3
5
1
6
2
ZMU04679
ZMU01943