Yamaha LZ300, Owner'S Manual

Page: 36 / 102

Basic components
30
displays “ ” (for port and starboard).
Use the “ ” (set) button to rotate the fuel
flow display in the following order:
●
Press the “ ” (set) button once to display
the fuel flow of the starboard engine. An
“ ” (for starboard) will also be displayed.
●
Press the “ ” (set) button a second time
to display the fuel flow of the port engine.
A “ ” (for port) will also be displayed.
●
Press the “ ” (set) button a third time to
return the display to the total fuel flow of
both engines. “
” (for port and starboard)
will also be displayed to indicate both the
port and starboard engines.
NOTE:
●
The fuel flow meter displays gallons/hour
or liters/hour according to operator prefer-
ence. Select the desired units of measure-
ment by setting the selector switch on the
back of the gauge during installation.
●
The fuel consumption meter and fuel
economy meter will indicate the same unit
of measurement.
EMU26760
Fuel consumption meter
This gauge displays the total amount of fuel
consumed since the gauge was last reset.
Press the “
” (mode) button repeatedly
until the indicator on the face of the gauge
points to total “
” (total). To reset the total
fuel consumption to zero, press the “ ”
(set) and “ ” (mode) buttons at the same
time.
EMU26770
Fuel economy
This gauge displays the distance per liter or
gallon when cruising, and is only for refer-
ence use by the operator.
Press the “
” (mode) button repeatedly
until the indicator on the face of the gauge
points to “
” (economy).
1. Selector switch
ZMU01749
ZMU01751
ZMU01752