DME-N Network Driver Installation Guide for LS9
3
To operate your Yamaha hardware from your computer via Ethernet, you'll need to install the DME-N Network Driver
software.
DME-N Network Driver is software that transfers MIDI data back and forth between your computer and the
hardware via Ethernet cable.
Connect the computer to the LS9 by using an Ethernet cable via a network switch. When you connect the computer
to the LS9 directly, you can use either a crossover or straight cable.
DME-N Network Driver applies to the system requirements of LS9 Editor. Refer to the LS9 Editor Installation Guide
for details.
DME-N Network Driver
Connection of computer and the LS9
Minimum System Requirements
Editor
Driver
Computer
Ethernet cable
Ethernet cable
Network switch
or
Ethernet cable
LS9
