background image

DME-N Network Driver Installation Guide for LS9

2

5. LIMITATION OF LIABILITY

YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT 
SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, 
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF 
THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in 
contract, tort or otherwise) exceed the amount paid for the SOFTWARE. 

6. THIRD PARTY SOFTWARE

Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data 
accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must 
abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY 
SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any 
way for the THIRD PARTY SOFTWARE or your use thereof.

• Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL 

IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE. 

• Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.

• Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or 

consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD 
PARTY SOFTWARE.

7. GENERAL

This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute 
or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this 
Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.

8. COMPLETE AGREEMENT

This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written 
materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this 
Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of 
Yamaha.

• The software and this manual are the exclusive copyrights of Yamaha Corporation.

• Please read carefully the Software Licensing Agreement at the front of this manual before installing the application.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of 

the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for 

the results of the use of this manual and the software.

• Future upgrades of application and system software and any changes in specifications and functions will be announced at the following 

website. 

http://www.yamahaproaudio.com/

 

• The screen displays as illustrated in this manual are for instructional purposes, and may appear somewhat different from the screens which 

appear on your computer. 

• The illustrations and LCD screens as shown in this owner’s manual are for instructional purposes only, and may appear somewhat different 

from those on your instrument.

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for 

your personal use.

• Windows is the registered trademarks of Microsoft

®

 Corporation.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Special Notices

When you use the LS9 Editor, be sure to install the DME-N Network Driver of the following version. 
For Windows XP: 1.0.1 or later
For Windows Vista: 1.2.0 or later
For Windows 7: 1.2.1 or later

Summary of Contents for LS9-16













Reviews: