Memo
• This product does not have a power switch. The power turns on when you insert
the plug of the power cord connected to this product into a power outlet.
4.2. Connecting to a network device or computer
Using LAN cables, connect the LAN port of the network device or computer to the LAN ports of this
product.
When using fiber optic cables to make connections, install an appropriate SFP module in the SFP+ port.
For the attachment procedure, refer to “
Referring to the following table, use cables that are compatible with the port’s link speed.
Link speed
Cables to use
Maximum
transmission
distance
100BASE-TX/1000BASE-T
Enhanced category 5 or higher
100 m
2.5GBASE-T
Enhanced category 5 or higher
100 m (*)
5GBASE-T
Enhanced category 5 or higher
100 m (*)
10GBASE-T
Category 6
55 m (*)
Category 6A
100 m
*The maximum transmission distances listed are theoretical. Actual transmission distances may vary
depending on the usage environment. Bundling cables or using similar methods may also cause ambient
noise, which may reduce the maximum transmission distance.
Caution
• Do not connect this product to a public Wi-Fi and/or Internet service directly.
Only connect this product to the Internet through a router with strong
password protections. Consult your router manufacturer for information on
optimum security practices.
• The LAN ports and the RJ-45 CONSOLE port all use the same 8-pin connector.
Improper connections may cause hardware damage or malfunction. Use care
when making connections.
4. Connections
20
| L2 SWITCH SWX2320-16MT User Guide
